|
972.867.9792
|
817.421.2326
Free Quote
Interested In
Sending

New Systems

There are several ways to install rain gutters on a home, but not all of them are ultimately beneficial. Improperly installed gutters can lead to wood rot as well as falling gutters, rendering a beneficial addition to your home into a potential liability.

Properly Installed Gutters

The Phillips Way

How our Systems are installed

It’s very important that rain gutters always be installed behind the “drip edge” to ensure proper capturing of rainwater. Installing gutters on top of roof flashing may be easier and quicker, but improperly installed rain gutters can actually do more damage than good. Rain gutters installed on top of roof flashing leave space for rainwater to splash behind the gutters onto the home’s fascia. This water, protected from wind and sun, rots the fascia and eventually leads to costly home repairs. If rain gutters are properly installed behind the “drip edge,” the only place for water to travel is down the gutter and away from your home.

Properly Secured Downspouts

Downspouts are enclosed, vertical pieces of guttering that carry water from the rain gutter to the ground. In order to keep a downspout in place, it must be secured to the side of the home with the use of straps. It is important to secure straps to the brick, not the mortar between bricks, because it creates a more secure, enduring hold. Mortar deteriorates over time, potentially creating leaks or causing downspouts to loosen or, even worse, fall down.

The Phillips Difference

Phillips installs gutters behind the “drip edge,” and places gutter hangers every 2 feet to provide sufficient support during heavy rains. Phillips also anchors downspout straps into the brick, and NEVER into mortar, providing more security to your overall installation. Additionally, Phillips uses larger screws which exceed industry standards to anchor our gutters. Due to Phillips’ commitment to such quality materials and processes, you can have confidence in your rain gutter installation. Convinced of the reliability of our gutters, Phillips offers a limited lifetime warranty.  When Phillips Gutters has finished your gutter job, you can be assured that our work is, as always, done “The Phillips Way”, ensuring “workmanship beyond your expectations”.
See “the Phillips difference” first hand by scheduling a FREE quote today. You can call or use the quote request form on our site.

Clog Protection

Free Quote
Interested In
Sending

Clog Protection Systems

Gutter protection systems, also called gutter covers, increase rain gutter efficiency by blocking debris from entering the gutters. Debris, often in the form of leaves, branches, shingles, toys and other items, can clog gutters, preventing them from effectively capturing rainwater and causing them to overflow. Even homes without trees nearby benefit from gutter covers, because something as simple as a tennis ball, can clog a downspout if lodged into the top opening.

There are a number of gutter protection solutions available on the market, but some are more hype than help. Gutter covers are not a “one size fits all” addition to your gutter system. The factor that identifies the right gutter cover for your system is the type of debris you are trying to prevent.

Stamped Steel Mesh

 

 

Stamped steel mesh is a great gutter cover option for your gutter system, because it’s a heavier gauge than typical mesh covers. Powder coated, the stamped steel mesh solution absorbs light instead of reflecting it, making it more aesthetically pleasing. It’s a cost effective option,  but still provides the protection you require from leaves, animals, and toys without restricting water flow into the gutters and reducing rain gutter efficiency.

Leaf Relief 

Leaf Relief is a great gutter cover option for your gutter system, especially for homes that need to block fine debris. Leaf Relief has smaller openings, which is important if dealing with smaller debris such as pine needles. Recessed, Leaf Relief isn’t visible from the ground. This provides protection for your system without aesthetic changes. It also comes with PVC seals and adjustable angles to ensure the perfect fit for your home’s rain gutter system. One of the models that Phillips installs even strengthens your gutter system, making Leaf Relief an easy choice.

 

Gutter Repair

Free Quote
Interested In
Sending

There are some tell-tale signs that your rain gutters aren’t working properly: leaking gutters, sagging or hanging gutters, poor drainage, and rusty gutters, just to name a few. These problems can start off small and grow into larger problems over time. Keeping your gutters in tip-top shape ensures continued, effective protection of your home’s siding, flower beds, and foundation.

Rusty Rain Gutters

If your gutters are rusting, it’s likely you have galvanized steel rain gutters. One of the many benefits to seamless aluminum gutters is that they do not rust. Rusty gutters are not just unsightly. They aren’t capturing and displacing rain water properly, and trying to repair galvanized steel gutters is often a losing battle. Don’t believe it when others tell you galvanized steel gutters can be fixed by primer and paint. Once galvanized steel gutters have begun to rust you cannot stop the rust from returning. Even sealing the leaks is a short-term fix, and you will probably have to reseal your gutters every few months. The best move for your pocketbook and your home is to replace rusty gutters with seamless aluminum gutters.

Gutters made of other materials like galvanized steel will eventually rust.

Leaking Rain Gutters

If your seamless aluminum gutters are leaking, it’s possible that they simply need a little TLC in the form of cleaning and resealing. It’s important that all debris be removed, which can sometimes be as simple as a rinse or as involved as removing the downspouts. Phillips has tested all the major sealing product types on the market, and we have found that our special sealant works the best in the multitude of conditions your home and gutters endure. With a bit of care from Phillips Gutters, your rain gutters will have as tight a seal as they did when they were first installed.

Gutter sealant around a downspout opening

Overflowing & Clogged Gutters

If you see your gutters overflowing during a rain, it’s likely that your gutters are clogged. The list of gutter clogging debris is lengthy: leaves, limbs, shingles, toys, nests, and rodents, just to name a few. Whatever is small enough to fit inside your rain gutters can eventually clog them. Cleaning out the gutters by removing the debris can sometimes solve an overflowing rain gutter issue. However, be aware that gutters will often need to be res    ealed after debris has been removed, so don’t be surprised if you spot some leaks afterward. The best way to prevent future clogs is by installing gutter covers over your existing gutter system.

 

In addition to debris, improperly installed gutters can also cause overflowing rain gutters. Too few, too small, or poorly placed downspouts can cause gutter systems to back up and overflow. The location, quantity, and size of downspouts are extremely important factors. Every time water turns a corner, it slows down and backs up. If your gutter system doesn’t factor in these elements you could be seeing rainwater overflow from your gutter system.

Loose, Falling Down, and Sagging Gutters

If rain gutters are loose, sagging, or falling down, it may be due to one of the following causes. Loose gutter spikes can cause saggy gutter syndrome. As the seasons change, the shifting of the gutters caused by changing weather hollow out the holes where gutter spikes have been inserted. As the spike’s grip on the fascia begins to loosen, so will your rain gutter installation.

 

Hidden hanger brackets, another means of attaching gutters to the home, is Phillips’ preferred method. However, even gutter hangers can come loose if the screws used to anchor them into the fascia header, the wood behind the fascia, are too short. Phillips uses longer screws than the industry standard to ensure secure rain gutter installation. We also space our gutter hangers only two feet apart to provide sufficient support during heavy rains. Too much space between gutter hangers is yet another cause of falling gutters.

 

The number one reason for falling downspouts is improperly securing the downspout straps into the brick mortar. To keep a downspout in place, it must be secured to the side of the home with straps. It is important to secure straps to the brick, not the mortar between bricks, because it creates a more dependable, enduring hold. Mortar deteriorates over time causing downspouts to spring leaks, pull away from the home, or even fall down..

Do You Have Hail Damage?

Hail damage to gutters is typically easy to see, but only if you know where to look. The effects of hail on rain gutters can be seen in the form of dings or indentations. Depending on the hail’s direction, these dings could be on the outside of the gutters as well as the bottom (if the hail fell straight down). Unless the hail has punched holes in your guttering, which is possible, hail damage affects the look of the gutters more than the functionality. However, every homeowner should be aware that home insurance companies will pay for replacing gutters as well as roofs that have experienced hail damage. You don’t have to live with hail damaged gutters simply because it hasn’t impacted the functionality of your gutter system.

Get a Gutter Repair Quote Today!

Phillips Gutters understands that rain gutter systems need care just like any other kind of investment. We will help you identify problems and correct them. Call us today or use the online form to request a FREE quote.

GALLERY

Powered by Olark